Suspension & Chassis Products
X
dealer login
Whiteline
Vehicle Search
Vehicle
Search
refresh
BFR1-KU4
Rear Sway bar - 18mm non adjustable
BFR1-KU4
Rear Sway bar - 18mm non adjustable
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge
Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 18mm fixed position sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Kits Required: 1
Warranty: 3 Year/ 60,000Km's
Kit Contents: 1 Sway Bar, 2 Links, 10 Bushings, 2 Saddles, 2 Plates, 2 Brackets, 2 U-Bolts, 2 Bolts, 10 Washers, 16 Nuts, Install Guide
Install Guide: Download Here
Service Kit: W0400-18
Important Notes
18mm - suits models with 9" diff - non adjustable
US $ 206.79
PRE-ORDER - Ships within 4-6 weeks
shipping
Calculate shipping?
Click here for rates & other info
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Sway bars are principally designed to reduce body roll or sway while cornering.
Larger diameter sway bars offer a higher torsional resistance which in turn increases overall roll stiffness.
Sway bar mounts utilise the latest in material formulation technology combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
By eliminating flex and compliance associated with original equipment, these high strength links are engineered to increase sway bar effectiveness and improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality steel and utilise the latest in material formulation technology link bushings ensuring maximum strength and durability.
This kit is covered by a 3 Year / 60,000kms warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Sway bars are principally designed to reduce body roll or sway while cornering.
Larger diameter sway bars offer a higher torsional resistance which in turn increases overall roll stiffness.
Sway bar mounts utilise the latest in material formulation technology combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
By eliminating flex and compliance associated with original equipment, these high strength links are engineered to increase sway bar effectiveness and improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality steel and utilise the latest in material formulation technology link bushings ensuring maximum strength and durability.
This kit is covered by a 3 Year / 60,000kms warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
<more features>
Kit Specifications
Bush
Type
Bush
Qty
OD
AA/AB
ID
B
L
C
FL
D
FL
OD
C/Tube
QTY
C/Tube
Size
Similar
Bushing Size
Diameter(mm) Diameter(in) Material Adjustment %Chart
18mm 23/32" Solid Spring Steel Non adjustable BL-281
Kit Specifications
 
Diameter(in) 18mm
Diameter(mm) 23/32"
Material Solid Spring Steel
Adjustment Non adjustable
%Chart BL-281
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 5.300kg 90cm 20cm 10cm
in/lbs 11.684lbs 35" 8" 4"
Units cm/kg in/lbs
Weight 5.300kg 11.684lbs
Length 90cm 35"
Width 20cm 8"
Height 10cm 4"
Fitment Difficulty
BFR1-KU4
Vehicle Applications
BFR1-KU4 is suitable for the following vehicles. Select a vehicle for specific fitment details:
FORD FAIRLANE 1967-1969 - FAIRLANE ZA, ZB
FORD FAIRLANE 1969-1972 - FAIRLANE ZC, ZD
FORD FAIRLANE 1972-1979 - FAIRLANE ZF, ZG, ZH
FORD FAIRMONT 1965-1966 - FAIRMONT XP SEDAN
FORD FAIRMONT 1967-1969 - FAIRMONT XR, XT SEDAN
FORD FAIRMONT 1969-1972 - FAIRMONT XW, XY SEDAN
FORD FALCON 1960-1965 - FALCON XK, XL, XM SEDAN AND COUPE
FORD FALCON 1965-1966 - FALCON XP SEDAN AND COUPE
FORD FALCON 1966-1969 - FALCON XR, XT SEDAN
FORD FALCON 1969-1972 - FALCON XW, XY SEDAN
FORD LTD 1973-1979 - LTD P5, P6
FORD MUSTANG 1965-1973 - MUSTANG EARLY, CLASSIC MODEL