Suspension & Chassis Products
X
dealer login
Whiteline
Vehicle Search
Vehicle
Search
refresh
KCA425
Front Control arm - lower inner rear bushing
KCA425
Front Control arm - lower inner rear bushing
Dealers
Share via Email
Print
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge
Notes: Important
Adds +0.5deg caster + anti-lift
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents:   2 Shell Bushings, 10 Spacers, Install Guide
Whiteline's Anti Geometry Kit replaces the front control arm rear vertically mounted bushing and featuring low compliance synthetic elastomer with high performance/low compliance bearings for optimum dynamic alignment. Positive static caster gains can also be achieved by the offset orientation of the bearing and unique to any Whiteline Anti geometry kit before it, KCA425 allows WRX and STI owners to tune geometry from Anti Lift to Anti Dive via a combination of recommended spacers delivering a window of handling behaviour and vehicle set up for the driver's needs.
US $ 120.06
Features
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Specially bonded design for optimised strength typically required in high load bearing applications.
 
Features
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Specially bonded design for optimised strength typically required in high load bearing applications.
Kit Specifications
Bush
Type
Bush
Qty
OD
AA/AB
ID
B
L
C
FL
D
FL
OD
C/Tube
QTY
C/Tube
Size
Similar
Bushing Size
Alignment Type Adjustment Type On Car Adjustable
Anti Lift / Caster Offset No
Adjustment Notes
Adds +0.5deg Caster + Anti Lift
Kit Specifications
Bush Type 20
Bush Qty 2
OD (AA/AB) 76.3 mm
ID (B) 14.1 mm
L (C) 53.9 mm
FL (D)
FL (OD) 84 mm
C/Tube QTY
C/Tube Size
Similar Bushing Size
 
Alignment Type Adjustment Type On Car Adjustable
Anti Lift / Caster Offset No
Adjustment Notes
Adds +0.5deg Caster + Anti Lift
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 1.410kg 10cm 16cm 26cm
in/lbs 3.109lbs 4" 6" 10"
Units cm/kg in/lbs
Weight 1.410kg 3.109lbs
Length 10cm 4"
Width 16cm 6"
Height 26cm 10"
Fitment Difficulty