Suspension & Chassis Products
X
dealer login
Whiteline
Vehicle Search
Vehicle
Search
refresh
KTA240
Front Control Arm Upper - Arm
*** CONTACT WHITELINE ***
KTA240
Front Control Arm Upper - Arm
*** CONTACT WHITELINE ***
click to enlarge
click to enlarge click to enlarge click to enlarge
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Kits Required: 1
Warranty: 3 Year/ 60,000Km's
Kit Contents: 2 Arms, Install Guide
Install Guide: Download Here
Important Notes
Performance arms - fixed offset alignment correction arms - a must for raised vehicles
US $ NAN
shipping
Calculate shipping?
Click here for rates & other info
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
This kit is covered by a 3 Year / 60,000kms warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
This kit is covered by a 3 Year / 60,000kms warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
Kit Specifications
ARM TYPE UNITS INCL BALL JOINT ADJUSTABLE ALIGNMENT TYPE ADJUSTMENT TYPE ON-CAR ADJUSTABLE
Alignment Pair Yes No Camber/ Caster Fixed Not Applicable
Kit Specifications
 
ARM TYPE Alignment
UNITS Pair
INCL BALL JOINT Yes
ADJUSTABLE No
ALIGNMENT TYPE Camber/ Caster
ADJUSTMENT TYPE Fixed
ON-CAR ADJUSTABLE Not Applicable
Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download 2 hrs DIY - With specialist tools
Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download 2 hrs DIY - With specialist tools
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 7kg 58cm 43cm 10cm
in/lbs 15.432lbs 23" 17" 4"
Units cm/kg in/lbs
Weight 7kg 15.432lbs
Length 58cm 23"
Width 43cm 17"
Height 10cm 4"
Fitment Difficulty
Videos



Videos



KTA240
Vehicle Applications
.
FORD EVEREST 2015-ON - EVEREST UA, UAII 2WD
FORD EVEREST 2015-ON - EVEREST UA, UAII 4WD
FORD RANGER 4WD 2011-2015 - RANGER PX I 4WD
FORD RANGER 4WD 2015-2018 - RANGER PX II 4WD
FORD RANGER 4WD 2018-ON - RANGER PX III 4WD
MAZDA BT-50 4WD 2011-2020 - BT-50 UP, UR 4WD