Suspension & Chassis Products
X
dealer login
Whiteline
Vehicle Search
Vehicle
Search
refresh
KTA240
Front Control arm - upper arm
*** CONTACT WHITELINE ***
KTA240
Front Control arm - upper arm
*** CONTACT WHITELINE ***
Dealers
Share via Email
Print
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge
Notes: Important
Complete pair of fixed offset alignment correction arms - a must for raised vehicles
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents:   2 Arms, Install Guide
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Features
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
 
Features
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 7kg 58cm 43cm 10cm
in/lbs 15.432lbs 23" 17" 4"
Units cm/kg in/lbs
Weight 7kg 15.432lbs
Length 58cm 23"
Width 43cm 17"
Height 10cm 4"
Fitment Difficulty
KTA240
Vehicle Applications
.
FORD EVEREST UA, UAII(7/2015-ON)
FORD RANGER PX I 4WD(11/2011-5/2015)
FORD RANGER PX II 4WD(6/2015-7/2018)
FORD RANGER PX III 4WD(8/2018-ON)
MAZDA BT-50 UP 4WD(11/2011-6/2015)
MAZDA BT-50 UR 4WD(7/2015-ON)