Suspension & Chassis Products
X
dealer login
Whiteline
Vehicle Search
Vehicle
Search
refresh
KTA255
Front Control and Radius arm - lower arm
KTA255
Front Control and Radius arm - lower arm
Dealers
Share via Email
Print
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge
Notes: Important
Complete Alloy control and radius arms with +/-0.5deg camber and caster correction
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents:   4 Arms, 4 Bolts, 8 Nuts, Install Guide
Whiteline KTA255 for the BMW 1 Series and 3 Series is a set of 4 arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber front control arm and radius arm bushings tend to take a beating, and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting. For ease of fitment these alloy arms also come complete with adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg camber and separately caster. These two key alignment angles can help ensure you get the car set up for minimal tyre wear with maximum grip. The bushings are designed with internal 'knurling' to ensure a reservoir for long-term lubrication with the supplied, extreme pressure molybdenum disulphide (LM) based grease for extended life. High strength ball joints are included with the arms to make this a fit and forget purchase compared to the short service life of the original and cheaper aftermarket alternatives.
US $ 481.07
Features
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.
This Whiteline kit is covered by a 3 Year / 60,000kms warranty.
 
Features
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.
This Whiteline kit is covered by a 3 Year / 60,000kms warranty.
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 0.000kg 50cm 43cm 58cm
in/lbs 0.000lbs 20" 17" 23"
Units cm/kg in/lbs
Weight 0.000kg 0.000lbs
Length 50cm 20"
Width 43cm 17"
Height 58cm 23"
Fitment Difficulty
KTA255
Vehicle Applications
KTA255 is suitable for the following vehicles. Select a vehicle for specific fitment details:
BMW 1 SERIES E81, E82, E87, E88(2004-2013)
BMW 3 SERIES E90, E91, E92, E93(3/2005-10/2011)
BMW M SERIES E82(2011-2012)
BMW M3 E90, E92, E93(2007-2013)