Suspension & Chassis Products
X
Whiteline
Vehicle Search
Vehicle
Search
refresh
WTK001
Press Tool - Kit
*** CONTACT WHITELINE ***
WTK001
Press Tool - Kit
*** CONTACT WHITELINE ***
click to enlarge
Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat treated steel will shatter under stress. The assortment of sleeves that make up the Whiteline Press Tool Kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Whiteline polyurethane bushings and aid in other workshop pressing requirements.
Kits Required: 1
Warranty: 1 Year
Kit Contents:
18 Tubes, 4 Stepped Plates, 4 Threaded Rods, 4 Spare Bearings, 8 Spare Bearing Plates
Install Guide: Download Here
Important Notes
26 piece press in/out tool kit
US $ NAN
shipping
Calculate shipping?
Click here for rates & other info
Contents
Kit Contains;
  • 18 x sleeves - 28mm-113mm diameter (5mm increments)
  • 4 press plates
  • 4 pulling spindles covering following bolt sizes (M10,M12,M14,M16)
    • Rolled thread on spindles
    • Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)
Ideal for bearings, bushes, spherical joints or other applications. Can be used on workshop press or better yet on car simply and easily. Less force required to remove / install bushings, bearing and joints making use easy even without power tools
 
Contents
Kit Contains;
  • 18 x sleeves - 28mm-113mm diameter (5mm increments)
  • 4 press plates
  • 4 pulling spindles covering following bolt sizes (M10,M12,M14,M16)
    • Rolled thread on spindles
    • Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)
Ideal for bearings, bushes, spherical joints or other applications. Can be used on workshop press or better yet on car simply and easily. Less force required to remove / install bushings, bearing and joints making use easy even without power tools
Features
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Features
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download
Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download
Packaged Weight and Dimensions
Units Weight Length Width Height Fitment Difficulty
cm/kg 18.000kg 55cm 30cm 15cm
in/lbs 39.683lbs 22" 12" 6"
Units cm/kg in/lbs
Weight 18.000kg 39.683lbs
Length 55cm 22"
Width 30cm 12"
Height 15cm 6"
Fitment Difficulty
WTK001
Vehicle Applications
.
UNIVERSAL PRODUCTS PRESS TOOL PRESS TOOL - KIT